Short Answer
Most complete remodels run $200 to $450+ per square foot depending on how much structural and MEP work is needed and the level of finishes.
- Typical cost
- $200 – $450+ per square foot depending on scope and finishes
- Typical timeline
- 6–14 months including design and permitting
- Permits
- Permits and inspections handled by us through LADBS or your city building department.
- Service area
- All of Los Angeles County, including the San Fernando Valley, Westside, South Bay and foothill cities.
- Credentials
- Licensed, bonded and insured. CSLB #1076428. Owner-operated.
What's Involved
Typically demo down to studs, structural corrections, new mechanical, electrical and plumbing, then insulation, drywall, flooring, cabinetry and finishes.
- Full demolition and structural corrections
- New MEP: HVAC, electrical and plumbing
- Panel upgrades and rewiring older homes
- Windows, doors, insulation and drywall
- Flooring, cabinetry, tile and finish carpentry
- Exterior, hardscape and landscaping
Older LA Homes
Houses from the 20s through the 60s usually hide the same set of surprises, including knob-and-tube wiring, galvanized supply lines, no insulation, and framing that was never bolted down. We open things up early and price the real conditions instead of writing change orders later.
- Knob-and-tube and aluminum wiring replacement
- Galvanized and cast-iron plumbing replacement
- Asbestos and lead testing where required
- Foundation bolting and bracing
Staying Sane During the Build
You'll get a milestone schedule up front and a private client portal with the payment schedule, signed documents, approvals and job-site photos, so you can see where things stand without chasing anyone for an update.
- Fixed-price proposal with real specifications
- Milestone-based payment schedule
- Photo and video updates from the site
- One project manager as your single contact
Complete Home Remodel Jobs, With Real Numbers
Every figure below is from a permitted project we completed in Los Angeles County, not an estimate or an industry average.
Whole-Home Remodel of a 1920s Santa Monica Bungalow
- Cost
- $585,000
- Duration
- 13 months including design and permitting
- Size
- 1,900 sq ft, full gut renovation
- Permits
- Santa Monica Building & Safety, permitted and inspected
Whole-Home Remodel on a Manhattan Beach Walk Street
- Cost
- $640,000
- Duration
- 12 months including permitting
- Size
- 2,150 sq ft on a 30 ft wide lot
- Permits
- Manhattan Beach Building & Safety, permitted and inspected
Complete Home Remodel on Ferrara Ln, Porter Ranch
- Cost
- $395,000
- Duration
- 10 months including permitting
- Size
- 2,600 sq ft two-story, full interior renovation
- Permits
- LADBS, permitted and inspected

Isaac Sade, Project Manager
Isaac runs complete home remodel projects at 1 Smart Build from the first site visit through final inspection: scope, plans, permit submittal, the crews on site, and the walkthrough at the end. You deal with one person who is accountable for the whole job.
Class B — General Building Contractor, CSLB #1076428. Bonded through and insured to $1,000,000 through U.S. Specialty Insurance Company. Rated 4.9 across 168 reviews.
More about IsaacFREQUENTLY ASKED QUESTIONS
How much does a whole home remodel cost in Los Angeles?
Most complete remodels run $200 to $450+ per square foot depending on how much structural and MEP work is needed and the level of finishes.
Do I need to move out during a full remodel?
For a gut remodel, almost always, the water, power and heat get shut off in stages. We'll tell you honestly during planning so you can budget for it.
How long does a complete home remodel take?
Typically 6 to 14 months from first design meeting to final walkthrough, with permitting often the least predictable stretch.
Are you the right home renovation contractors near me for an older house?
If your home was built between the 1920s and 1960s, yes, gut renovations of older LA-area homes are our core work. We handle whole house renovations across Los Angeles, the San Fernando Valley and cities within 100 miles of Woodland Hills, replacing outdated wiring, plumbing and framing as part of one permitted project.
Areas We Serve
1 Smart Build provides complete home remodel services within a 100-mile radius of our Woodland Hills office, covering Los Angeles County, Ventura County, Orange County and the surrounding region. Homeowners searching for a remodeling contractor near me regularly hire us in:
- Complete Home Remodel in Woodland Hills
- Complete Home Remodel in Calabasas
- Complete Home Remodel in Encino
- Complete Home Remodel in Sherman Oaks
- Complete Home Remodel in Studio City
- Complete Home Remodel in Pasadena
- Complete Home Remodel in Glendale
- Complete Home Remodel in Burbank
- Complete Home Remodel in Santa Monica
- Complete Home Remodel in Beverly Hills
- Complete Home Remodel in Culver City
- Complete Home Remodel in Long Beach
- Complete Home Remodel in Torrance
- Santa Clarita
- Thousand Oaks
- Ventura
- Anaheim
- Irvine
Don't see your city? View all service areas or give us a call, if you're within 100 miles, we build there.
DISCUSS YOUR PROJECT WITH 1 SMART BUILD
Licensed, bonded and insured design-build general contractor serving Los Angeles County and Southern California. Tell us about your property and goals, and we'll walk you through feasibility, permitting and a clear plan.

